Name: Step 3: Mark and Compare 24hrs Later
Uploaded: 2021-04-19T21:12:32.813949+00:00
Duration: 203 s
Channel: ALD
Description: 24 hours later we've got our measurements and we'll see if we've got the measurements of the evaporation on the inside of the bucket. And we've got our water loss markings on the outside of the bucket

24 hours later we've got our measurements and we'll see if we've got the measurements of the evaporation on the inside of the bucket. And we've got our water loss markings on the outside of the bucket

<p>24 hours later we've got our measurements and we'll see if we've got the measurements of the evaporation on the inside of the bucket. And we've got our water loss markings on the outside of the bucket</p>

Fix Your Leak Now!!!

https://d3ev5earl6dvd0.cloudfront.net/public-media/videos/001/877/001877/video_Tq4dMdM.mp4#t=115

Step 3: Mark and Compare 24hrs Later

Step 1: Measure the evaporative condition of the pool

Step 2: Fill & Mark

Bucket Test Additional Tips

Book ALD Now

CTA1

Find out if your pool is leaking using this simple test.  https://www.americanleakdetection.com/

<p>Find out if your pool is leaking using this simple test.  <a href="https://www.americanleakdetection.com/" rel="noopener noreferrer" target="_blank">https://www.americanleakdetection.com/</a></p>

https://d3ev5earl6dvd0.cloudfront.net/public-media/videos/001/877/001877/video_Tq4dMdM.mp4

How do we measure the evaporative condition of the pool? We start with some masking tape and we place it on the outside of the bucket here and we place it on the inside of the bucket here.

Fill a bucket with water and mark the water level on the outside of the bucket. After filling the bucket replace the bucket in the pool and mark the water level on the inside of the bucket.